迪威網(wǎng)友003170
發(fā)布時(shí)間：2020/2/24 7:19:00
Tray exteion for non-branded food dehydrato which are 275 mm (10.8 in) or 330 mm (13 in) in diameter, so that they can be used to dry filament. Please note that I have not tested the sizing of any of the 330 mm parts as I do not own a food dehydrator that size. Please let me know via comment or message if you have problems with these pieces.
It is split into quarte. One veion has an M5 hole which you can screw a Bowden adapter into, another is solid, and the third has a space to mount a temperature and humidity gauge, which is also untested as I do not own one. Separate mounting pieces for the gauge are available for both sizes.
The gauge I have used for reference has a 25 x 45 mm mounting hole, such as this one:
This veion won't stack. If there is demand for a stacking veion I can make one at a later time.
I recommend printing them with PETG or ABS in order to withstand high temperatures without deforming. However, these pieces are fairly thick and may hold up well if PLA is used. No supports are needed but a brim is highly recommended.
If you're also looking for a spool holder to use with your dehydrator, you can try one I made:
It is split into quarte. One veion has an M5 hole which you can screw a Bowden adapter into, another is solid, and the third has a space to mount a temperature and humidity gauge, which is also untested as I do not own one. Separate mounting pieces for the gauge are available for both sizes.
The gauge I have used for reference has a 25 x 45 mm mounting hole, such as this one:
This veion won't stack. If there is demand for a stacking veion I can make one at a later time.
I recommend printing them with PETG or ABS in order to withstand high temperatures without deforming. However, these pieces are fairly thick and may hold up well if PLA is used. No supports are needed but a brim is highly recommended.
If you're also looking for a spool holder to use with your dehydrator, you can try one I made:
|
共個(gè)文件
壓縮包大?。?68KB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付