DIY ATX實(shí)驗(yàn)臺(tái)電源

I wanted to convert an old ATX PSU into a lab bench power supply.
Since none of the desig on thingivee fullfilled my needs I created my own design.
The features are:
3.3V, 5V, 12V, and GND rails of PSU attached to banana plugs
Integrated buck-boost converter to also support other voltages
Two status leds
One additional switch to turn PSU ooff
Parts required:
1 (old) ATX PSU
1 buck-boost converter, I used this ARCELI Buck Boost Converter ( - when using a different one the dimeio may differ)
8 banana plugs (4 red ones, and 4 black ones)
10 M3 nuts
10 M3 screws (I used 8 mm)
1 M3/M4 screw nut to attach the front panel at the bottom. For this I drilled a hole in the printed part (front_plate.stl).
Screws to mount psu_cover.stl and fan grill should be already available from ATX PSU
Crimp connecto for wires (ring terminals to attach to banana plugs, ferrules for screw terminals)
P.S.: I attached fusion360/ step files in case you need to change some dimeio for your PSU you are using / want to use a different buck-boost converter / you want to improve the design etc ;)