迪威網(wǎng)友0abaaa
發(fā)布時間：2020/1/23 0:57:00
It is a dimmable led touch lamp with the aid of an Arduino Mini pro or a Wemos mini D1 if you want to control the lamp in addition to manual mode via WiFi and activate it either via the Blynk app or via voice with Alexa or Google Home.
The sketch is at the bottom of this page.
GOOD WORK AND HAPPY PRINTING!!!
LIST OF MATERIALS:
2 X LED COB 200*10mm 12v 10W Warm
1 X LDD-600L Convertitore: DC/DC Costant Current; 19W; Vin: 9÷36V; Vout: 2÷32VDC Iout: 600ma
1 X Wemos D1 Mini or ATMEGA328P Pro Mini 5V/16MHz
1 X Mini Buck Converter Step Down Power Supply 3A Adjustable DC-DC 3A 4.5-28V To 0.8-20V
1 X 2Pin Mini Switch 12mm 1A waterproof
1 x 5*20mm Glass fuse holder Screw Type
1 x TTP223B digital touch seor capacitive
3 x M4 x 35mm
3 x M4 x 35mm
4 x M4 x 15mm
4 x M4 Hex nut
3 X M4 Butterfly Nuts
1 X DC Power Jack Socket 5.5mm x 2.1mm
1 X Power supply adapter 24V 1A
1 x Fuse 1A 5x20mm
The sketch is at the bottom of this page.
GOOD WORK AND HAPPY PRINTING!!!
LIST OF MATERIALS:
2 X LED COB 200*10mm 12v 10W Warm
1 X LDD-600L Convertitore: DC/DC Costant Current; 19W; Vin: 9÷36V; Vout: 2÷32VDC Iout: 600ma
1 X Wemos D1 Mini or ATMEGA328P Pro Mini 5V/16MHz
1 X Mini Buck Converter Step Down Power Supply 3A Adjustable DC-DC 3A 4.5-28V To 0.8-20V
1 X 2Pin Mini Switch 12mm 1A waterproof
1 x 5*20mm Glass fuse holder Screw Type
1 x TTP223B digital touch seor capacitive
3 x M4 x 35mm
3 x M4 x 35mm
4 x M4 x 15mm
4 x M4 Hex nut
3 X M4 Butterfly Nuts
1 X DC Power Jack Socket 5.5mm x 2.1mm
1 X Power supply adapter 24V 1A
1 x Fuse 1A 5x20mm
|
共個文件
壓縮包大?。?04KB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付