迪威網(wǎng)友f5009f
發(fā)布時間：2020/6/16 20:40:00
What do you do when you have a leaf switch button but no leaf switch, a bunch of microswitches, and it's COVID-19 outside?
You make your own microswitch to leaf switch adapter!
This mounts with #6 x 1/2" screws. The mount/base needs to be screwed in place then the switch lever is clipped in to place followed by the switch. Care must be taken to not break anything during assembly. I have included a veion that uses M3x16 and M3x20 screws and nuts if you have a ton of those around and want a more robust solution.
I included a screw plate that you can print and glue on the side with good old cyanoacrylate if you have the space on your panel for the extra width.
I also remixed Adapter ring for pinball button by 3dwkl to include a mount for a short 5mm LED which I will use to light my traparent blue button.
You make your own microswitch to leaf switch adapter!
This mounts with #6 x 1/2" screws. The mount/base needs to be screwed in place then the switch lever is clipped in to place followed by the switch. Care must be taken to not break anything during assembly. I have included a veion that uses M3x16 and M3x20 screws and nuts if you have a ton of those around and want a more robust solution.
I included a screw plate that you can print and glue on the side with good old cyanoacrylate if you have the space on your panel for the extra width.
I also remixed Adapter ring for pinball button by 3dwkl to include a mount for a short 5mm LED which I will use to light my traparent blue button.
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付