迪威網(wǎng)友4fc9c5
發(fā)布時間：2023/8/24 19:33:00
超薄X1C集塵箱。因為很苗條，所以不適合大量的垃圾印刷。像部分附加的圖像一樣添加油漆支持，就能完成漂亮的效果。
垃圾堆積的話會和斜坡連接起來，所以偶爾用手寫出來就可以了。
Slim type dust box for e it is slim，it is not suitable for printing that produces a large amount of dust。If you attach a paint support like the attached image，it will be a beautiful finish。
As garbage accumulates，it will be connected to the slope and come up，so it is a good idea to write it down by hand from time to time.
除了3D打印部件之外，還需要下列部件。
In addition to the 3D printed parts，the following parts are required.
3個直徑13 mm高2.5 mm的釹磁鐵
Neodymium magnets with a diameter of 13 mm and aheight of 2.5 mm：3pcs
Https：//
垃圾堆積的話會和斜坡連接起來，所以偶爾用手寫出來就可以了。
Slim type dust box for e it is slim，it is not suitable for printing that produces a large amount of dust。If you attach a paint support like the attached image，it will be a beautiful finish。
As garbage accumulates，it will be connected to the slope and come up，so it is a good idea to write it down by hand from time to time.
除了3D打印部件之外，還需要下列部件。
In addition to the 3D printed parts，the following parts are required.
3個直徑13 mm高2.5 mm的釹磁鐵
Neodymium magnets with a diameter of 13 mm and aheight of 2.5 mm：3pcs
Https：//
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付