自動機動指揮官

Hello, I'm Jjojong.
I upgraded the product that was previously motorized by a Comandante.
I upgraded it so that I could get my own coffee while using ROK.
It's really comfortable and good.
I feel that coffee life has become easier.
If you have a Comandante, you can make it easy, so give it a try.
*Auto motorized COMANDANTE with 24V adaptor
Wood plate
3D printed materials
Motor : IG32-MM20W-E(24V), 1/100 ratio
Push lock S/W (12mm)
5.5 pi DC Jack & connector (male & female)
DC adaptor : 15~24V
Black pipes
elbow 90 degree (15A) : 3ea
socket (15A) : 1ea
side-4dir-T (15A) : 1ea
Nipple (34mm, 15A) : 4ea
Nipple (65mm, 15A) : 3ea
(Link in KOREA)
Motor Information : IG32-MM20W-E(24V) and reduction ratio is 1/100, torque is ..
More detailed information is below link click and :
Push-lock switch(12mm) :
5.5 pi DC socket:
DC-adaptor(24v/2.5A) :
Black pipes:
(Link in Aliexpress) - Should be use 'motor_Fix_12V86RPM.stl'
Motor
A) Spec is 24V, 140rpm(90rpm), Package A, 11.8kgF/cm(18kgF/cm)
and Size is very similar.

B) Spec is 12V, 86rpm, Package A, 9kgF/cm
and Size is very similar.

Motor coupler
Motor coupler is below..
6mmx9.5mm, (6mm is a motor side, and 9.5mm is hex socket(5.5mm hex socket) but it's possible to change size as hex-socket outside diameter.)
(1) 6mm x 9.5mm
(2) 6mm x 10mm
Hex-Socket(5.5mm)

And if you use this Hex-socket item, you have to change the motor coupling is below.
Shaft coupling : 6mmx12mm
====================================================================
(Korean)
利用黑管管管管道制作了Auto Comander。
墊子是用原木切割，加工而成的。
剩下的馬達和鼻子抓住端子的部分都是用3D打印制作出來的。
鼻子和咖啡墊部分是杠桿專用的。
中間支持鼻子末端，抓住的部分用海綿緊緊抓住。
通過管道連接電線，在輸出物的上方安裝了噓開關，使其可以控制O/Of Control。
底部不用的筆記本電腦198 V，只更換了接頭，電源供應就結束了。
好了~~現在過著舒適的咖啡生活~~ go！走。