迪威網友02f421
發布時間：2021/3/30 16:31:00
Modular fuel tank for your wargaming tables - fits great into Warhammer 40,000, Necromunda and other sci-fi settings. Thanks to being modular, it can be fitted with fuel pipe and platform on the fly as you need for your current game.
Key features:
modular and highly customizable model
with detachable platform that can easily fit 2 to 8 models depending on the size of their bases
dimeio of the fully fitted fuel tank is 64 x 146 x 89 mm
28mm scale
print is tested on FDM Ender 5 printer
STLs properly scaled and are plug & print ready
Itructio:
1) To create fuel tank without top platform:
Print following: FuelTank_Middle, 2 x FuelTank_End and 2 x FuelTank_Stand - no supports required
Glue FuelTank_Ends on both ends of FuelTank_Middle
FuelTank_Stands doesn't require glueing to FuelTank_Middle but can improve overall stability, especially when using top platform
2) To add fuel pipe:
Print FuelTank_FuelPipe - there is slight overhang in the upper half of the model. This can be printed without supports but I recommend adding support if you are having problem with lower quality of the print in this area.
This part doesn't require glueing and can be easily put next to the FuelTank_Ends as shown on pictures. Fuel pipe can be easily attached and detached to fit your current game session
3) To add platform:
Print following: FuelTank_Platform (*), 2 x FuelTank_PlatformSupport, FuelTank_Ladder (1-4 pieces as you see fit)
Glue FuelTank_PlatformSupport to the bottom side of the FuelTank_Platform on designated area
Attach FuelTank_Ladder to slots on FuelTank_Platform. This is push-to-fit and doesn't require glueing but feel free to glue these parts together
Position completed platform on completed fuel tank from point 1) No glue is required - this will make platform detachable to fit your current game session needs. However, you can easily glue platform to the rest of the fuel tank if you wish so
Refer to pictures and exploded view to assemble fuel tank with platform correctly
(*) - since FuelTank_Platform has grid pattern on the bottom it can cause bed adhesio problems on improperly calibrated printe. I recommend printing with very low speeds for initial laye or you can print FuelTankl_PlatformFullBottom. In this STL, there is no grid pattern on fit few laye and should print easily enough on most printe
Like what you print?
Support me on Patreon to help me create & get exclusives:
Follow my socials to see upcoming 3D prints:
Twitter:
Itagram:
Facebook:
Key features:
modular and highly customizable model
with detachable platform that can easily fit 2 to 8 models depending on the size of their bases
dimeio of the fully fitted fuel tank is 64 x 146 x 89 mm
28mm scale
print is tested on FDM Ender 5 printer
STLs properly scaled and are plug & print ready
Itructio:
1) To create fuel tank without top platform:
Print following: FuelTank_Middle, 2 x FuelTank_End and 2 x FuelTank_Stand - no supports required
Glue FuelTank_Ends on both ends of FuelTank_Middle
FuelTank_Stands doesn't require glueing to FuelTank_Middle but can improve overall stability, especially when using top platform
2) To add fuel pipe:
Print FuelTank_FuelPipe - there is slight overhang in the upper half of the model. This can be printed without supports but I recommend adding support if you are having problem with lower quality of the print in this area.
This part doesn't require glueing and can be easily put next to the FuelTank_Ends as shown on pictures. Fuel pipe can be easily attached and detached to fit your current game session
3) To add platform:
Print following: FuelTank_Platform (*), 2 x FuelTank_PlatformSupport, FuelTank_Ladder (1-4 pieces as you see fit)
Glue FuelTank_PlatformSupport to the bottom side of the FuelTank_Platform on designated area
Attach FuelTank_Ladder to slots on FuelTank_Platform. This is push-to-fit and doesn't require glueing but feel free to glue these parts together
Position completed platform on completed fuel tank from point 1) No glue is required - this will make platform detachable to fit your current game session needs. However, you can easily glue platform to the rest of the fuel tank if you wish so
Refer to pictures and exploded view to assemble fuel tank with platform correctly
(*) - since FuelTank_Platform has grid pattern on the bottom it can cause bed adhesio problems on improperly calibrated printe. I recommend printing with very low speeds for initial laye or you can print FuelTankl_PlatformFullBottom. In this STL, there is no grid pattern on fit few laye and should print easily enough on most printe
Like what you print?
Support me on Patreon to help me create & get exclusives:
Follow my socials to see upcoming 3D prints:
Twitter:
Itagram:
Facebook:
|
共個文件
壓縮包大小：4MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付