OSPREY“魚鷹” Nerf Blaster 軟彈發射器

Small animation may help you:
可供參考的小動畫：
(EN)
(中文)
"OSPREY"A1 modded parts
“魚鷹”A1 改件
2022.09.09 update
Upload a rar pack called "AlumPipeDrillingHelper",which can help you drill those 2 holes on that OD12 ID10 a necessity.
2000.09.09更新
上傳了一個rar文件包“AlumPipeDrillingHelper”，能讓你在那根外徑12內徑10的管子上打孔簡單點。如果你要打20份五金包，那你大概會需要這個。
2022.09.05 update
SORRY I forgot to exprort one small partof this blaster.
This part has been exported as "34_TriggerLimit.stl".
Now the files are comepleted,I think...
Just download the RAR file for all STLs.
2022.09.05更新
非常抱歉我導出時漏了個件。
現在給他補上了，名字叫做“34_TriggerLimit.stl”。
文件現在大概是齊了吧。
還是，下載rar壓縮包，里邊啥都有。
"OSPREY" is an air-pressure driven nerf dart blaster.
Use the 13mm short dart.
Ru about 180 fps with Worker dart.
Fit Nerf blaster designed by myself,lots of improvement to be made later.
“魚鷹”是壓氣式軟彈發射器。
設計使用13mm短彈。
原廠跑分55左右，使用工匠彈。
這是我完全自己設計的第一把，之后會有許多改件的。
2022.08.22 update
Just download "OSPREY魚鷹.rar" ,all STL files with assemble itructio are included.
For this blaster,I used ZhuoPu PLA, 40% infill,with 2mm wall,this make it quite strong.
(As I believed,wall thickness affects these model's structural strength more than infill percentage,especially those parts with few infill space.)
"" and "" are optional.
One is the rifiling barrel speiclly designed for this blaster,
One may help you machining the Bolt Handle metioned in the itruction pdf.
2022.08.22更新
請直接下載“OSPREY魚鷹.rar”，這個壓縮包內包含所有STL文件還有組裝說明。
這把發射器我打印時用的是卓普pla，打的40%填充，2mm壁厚，打出來是很結實的。
（我的想法是，壁厚對零件強度的影響要大于填充，特別是這些本來就沒啥填充的打印件。）
""還有""這倆是可選的。
一個是給這把發射器專門設計的魚線管，
另一個是在你給拉栓里那根鋁棒打孔時可能會用到的輔助工具。