迪威網友351348
發布時間：2019/11/25 1:56:00
在NC3D 上的Z Wobble可能會讓你發瘋所以我決定把Z的魔杖換成LEADSCREW M8我有的那些是在eBay上買的典型的
所有關于如何重新配置打印機的信息來自https：
硬件的調整取決于你安裝的螺絲棒的速度，我把這個鏈接留給你計算。
您可以從控制面板直接配置Z軸步驟編號，在配置菜單中，移動，ZSTEP：400（對于8毫米的旋轉）。
設計是在第一階段，我們會改進它，但它的工作非常好，改變它在打印機中是非常干燥的，不需要全部拆掉。
我們修改了設計，以利用LEAD Nut Redondo的設計，這些設計也很容易成為COEGUIR，在eBay中成本效益最高。
我用了30厘米的LEADSCREW M8為了不達到頂部，當你從上面松開的時候，它似乎是更好的工作，我會嘗試另一個尺寸達到頂部，當我得到了35厘米。
不管怎樣，這方面的改進是非常大的，照片的平方面積只有一層皮，沒有填充。
The Z wobble in the NC3D can go crazy，so I decided to change the rots of the Z for some M8 leadscrew I had，are the typical ones that are bought on ebay，or ask your local supplier…
All the information on how to adjust the printer came from article is excellent and you will learn a lot with it.
The adjustments in the hardware depended on the pitch of the threaded rod that you put，I leave this link to calculate it.
The number of steps of the Z axis can be configured directly from the control panel，in the menu to configure，movement，ZSTEP:400（in the case of 8mm per turn）
The design is in its fit phase and we will be improving it，but it works very well，it is very easy to change it in the printer and it is not necessary to disassemble it whole.
We have paritdo of its design，and we have modified it to use those with the lead nut round，which are also the chesort on ebay.
我用了30厘米的鉛So that they do not reach the top，when they are loose at the top，it seems to work better，I will try another size that reaches the top，when I reach the 35cm.
Anyway，the improvement is extraordinary，the squares of the photo are printed with 1 single layer of skin and without filing.
谷歌轉盤
所有關于如何重新配置打印機的信息來自https：
硬件的調整取決于你安裝的螺絲棒的速度，我把這個鏈接留給你計算。
您可以從控制面板直接配置Z軸步驟編號，在配置菜單中，移動，ZSTEP：400（對于8毫米的旋轉）。
設計是在第一階段，我們會改進它，但它的工作非常好，改變它在打印機中是非常干燥的，不需要全部拆掉。
我們修改了設計，以利用LEAD Nut Redondo的設計，這些設計也很容易成為COEGUIR，在eBay中成本效益最高。
我用了30厘米的LEADSCREW M8為了不達到頂部，當你從上面松開的時候，它似乎是更好的工作，我會嘗試另一個尺寸達到頂部，當我得到了35厘米。
不管怎樣，這方面的改進是非常大的，照片的平方面積只有一層皮，沒有填充。
The Z wobble in the NC3D can go crazy，so I decided to change the rots of the Z for some M8 leadscrew I had，are the typical ones that are bought on ebay，or ask your local supplier…
All the information on how to adjust the printer came from article is excellent and you will learn a lot with it.
The adjustments in the hardware depended on the pitch of the threaded rod that you put，I leave this link to calculate it.
The number of steps of the Z axis can be configured directly from the control panel，in the menu to configure，movement，ZSTEP:400（in the case of 8mm per turn）
The design is in its fit phase and we will be improving it，but it works very well，it is very easy to change it in the printer and it is not necessary to disassemble it whole.
We have paritdo of its design，and we have modified it to use those with the lead nut round，which are also the chesort on ebay.
我用了30厘米的鉛So that they do not reach the top，when they are loose at the top，it seems to work better，I will try another size that reaches the top，when I reach the 35cm.
Anyway，the improvement is extraordinary，the squares of the photo are printed with 1 single layer of skin and without filing.
谷歌轉盤
|
共個文件
壓縮包大?。?00KB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付