宜家兄弟Oculus Rift CV1相機(jī)支架

A bracket for mounting the Oculus Rift CV1 tracking camera onto IKEA BROR frames. It's designed to go on the outside of the BROR frame, and bolted in place with two screws/nuts that come with the BROR frames.
Ucrew the CV1 camera stand and place the camera in the bracket. It should be a tight fit, but there's also a hole at the bottom to optionally use a standard tripod screw to secure the camera in place.
Print with the top face down. I used the cura tree supports for the side panel, and it came out great, but you might be able to print without supports as well. YMMV.